Catalog
Search
Printer friendly version Printer friendly version

ECU Explorer (Infineon Tricore MCU’s over CAN-bus)

 
 
Vote(s): 55
Rate it
1,000.00
Handling charge:  54.78

ECU-Explorer tool exclusively designed to read Infineon Tricore MCU’s over CAN-bus.
Supports Read/Write EEPROM function for secured and non-secured SAC-TC1766, SAC-TC1767, SAC-TC1797 microcontrollers.
ECU-Explorer comes with Mileage, DPF, ECU system time and ISN built-in calculators.

Purpose of use:

  1. Change power level (320-328) (System time reset only, you must use ESYS for coding and ISTA to make final programming)
  2. Switch OFF oxygen sensors (System time reset only, you must use ESYS for coding and ISTA to make final programming)
  3. Switch OFF check engine lamp(System time reset only, you must use ESYS for coding and ISTA to make final programming)
  4. Reset mileage
  5. Reset system time
  6. Change ISN (for engines N13,N20,N55 etc.)

 Supported ECU types:

  • F-Series
    DDE701A
    DDE701P
    DDE721B
    DDE721P
    DDE73A
    DDE731A
    DDE741A
    DDE751A
    MEVD1725 ( N13 ) F20 ,F21 Серия
    MEVD1724 ( N20 ) F10 , F11 , F12 , F13 , F18 , F25, F30 , F31 , F35 Серия
    MEVD1726  (N55) F01  F10  F25  F25  F30
    MEVD1728  (N63 S63) F01  F10
    MEVD1729 (N20) F10  F20  F25  F30  F32
    MEVD172 ( N55 ) F01 , F02 , F07 , F10 , F11 , F18 , F25
    MEVD172P (N20) F10  F20 F25   F30  F32
    MEVD172S (N55) F10  F20 F25   F30  F32
    MEVD172G (N55) F10  F20 F25   F30  F32

    E-Series
    DDE70_EDC17CP06
    DDE701_EDC17CP50
    DDE71_EDC17CP02
    DDE721_EDC17C41
    DDE73_EDC17CP09
    DDE731_EDC17CP45

    MEVD17 ( N55 ) E70 , E71 , E60 , E82 , E84 , E88 , E90 , E91 , E92 , E93
    MEVD1724 (N20) E89 E84
    MEVD1726 (N55) E89 E84 E70 E71
    MEVD1729 (N20) E89 E84

    MINI
    DDE701_EDC17CP50
    MED172 (N14/N16)
    MEV172 (N14/N16)
    MEV1722 ( N18 ) MINI
    MEVD1722
    MEVD1727

    MOTORCYCLES
    BMSX

NOTE: ECU-Explorer is only programmer allowing to read-write eeprom and reset ECU for further coding and programming. Additional tools may require to finish your job.

NOTE: For N13 and N20 engines please use connector from ECU-Explorer set.

USER MANUAL

SOFTWARE DOWNLOAD

BOOT PIN MUST BE PERMANENTLY SHORTED TO GROUND DURING READ/WRITE PROCEDURE

Any questions?

Please use the following form to request information.

Your name:

Email

Please specify your question about ECU Explorer (Infineon Tricore MCU’s over CAN-bus):


Type the numbers you see in the picture below
code

English  Русский 
Currency:
(empty)
 
Blog / News
06.08.2017 23:39:05
06.08.2017 23:31:25
04.05.2017 17:59:08
02.05.2017 15:41:08
16.04.2017 11:22:21
Subscribe for email newsletter (blog):
or RSS 2.0
AVTOTOOLS.All rights reserved.
Powered by WebAsyst Shop-Script